Z-Fi products are not certified by the California Air Resource Board (CARB) for • use on CA highways. GETTING HELP Factory support is available in the US at 909-597-8300. • For fastest support outside of the US, find your local importer at bazzaz.net. •...
4. Shift Switch and mounting hardware (For Z-Fi TC only) 5. Scotchlok (4) 6. USB cable 7. Swingarm stickers 8. Velcro 9. Download Bazzaz software from bazzaz.net/index.php/software-overview FUEL HARNESS 1. Main 2. +12v SW Power 3. Z-AFM 4. Map Select 5.
Page 3
4. Fuel Tank 5. Fuel Tank Cover 4>SECURE 1. Mount the Bazzaz control unit using the supplied Velcro in the tail section of the bike. 2. Route the Bazzaz harness beneath the plastic tray and connect the Bazzaz fuel harness to the control unit. Begin to route the harness towards the motor along the side frame rail.
Page 4
FACTORY BAZZAZ BAZZAZ 1. Route the Bazzaz speed sensor connector beneath the factory airbox and to the right hand side of the bike. 2. Locate the factory speed sensor connector to the right of the starter motor. 3. Disconnect the factory speed sensor connector and install the Bazzaz speed sensor connectors inline.
Page 5
1. Continue to route the harness along the left hand side of the bike towards the front of the airbox. 2. Locate the factory grey injector connector. 3. Disconnect the factory injector connector, and install the Bazzaz left injector connector inline. BAZZAZ FACTORY 1.
Page 6
FACTORY 3. Connect the Bazzaz 12v SW power connector. BAZZAZ 1. Locate the Bazzaz ground lug, and connect it to the negative battery terminal. SECTION 6>CONNECT, AND 7>QUICKSHIFT ARE FOR USE WITH THE BAZZAZ Z-FI TC ONLY!! FOR Z-FI, PLEASE SKIP FORWARD TO...
Page 7
2. Remove the factory shift rod and begin to install the Bazzaz shift switch using one of the supplied allen stud bolts and tighten. 3. Next begin to install the Bazzaz shift rod. The shift rod may need to be cut to get your original shift pedal height 4.
Page 8
You can switch from map 1 to map 2 by unplugging the map select jumper on the Bazzaz fuel harness. Map 1 will be pre-programmed; depending on your model, there may be a pre- programmed map in the map 2 slot.
Page 9
If problem still persists, please contact Bazzaz tech support Factory support is available in the US at 909-597-8300. • For fastest support outside of the US, find your local importer at bazzaz.net • 11>REINSTALL After it is determined that everything is correct, reinstall the components removed in step 3.
Page 10
Weatherproof toggle and easy installation. 79.95 SELF MAPPER Purchased separately. Build race-level fuel maps for your specific modifications, fuel type, engine, and atmospheric conditions simply while riding. 02 sensor mounts into exhaust and control box easily plugs in to any Bazzaz Z-Fi product. 299.95...
Page 11
MAP SELECT/ TC ADJUST SWITCH Purchased separately. Switch maps on the fly with this handlebar-mounted switch. Quickly adjust traction control settings using a 10-point dial. Weatherproof toggle and easy installation. 129.95 TC ACTIVE LIGHT Purchased separately. Illuminates when traction control is engaged.
Page 12
THE SMARTEST PERFORMANCE TUNING TECHNOLOGY F7410 |T7410...