Weatherdock EasyTRX 3 User Manual page 61

Weatherdock AG
www.easyAIS.com
malfunction of the easyTRX3 and will guide you
or your service partner to solve the problem.
Warning Info
The warning messages will appear only for a
short time until the corresponding
configuration has changed. For example: "no
valid fix" means that the easyTRX3 has got no
GPS position fix up to now. As soon as there is a
position fix, this warning message disappears.
Every 30 seconds the easyTRX3 is doing a self-
test. Each Error or Warning Message has got a
60 second count-down. If the cause of the
message is no longer given within the next self-
test, the message disappears. Most of the Error
Messages are caused by hardware malfunction
and/or cable connection failure. These
messages will still appear, event within the next
following self-tests.
Version
Here you can see details about the current
firmware release version as well as units serial
number.
Additional you can initiate a factory reset, if
necessary. Please follow the instructions
displayed on the screen.
Seite 61