Weatherdock easyTRX2S Series Manual page 35

This function is absolutely necessary in some navigation software because
the charts and weather information are downloaded from the Internet.
- In order to connect the easyTRX2S with your router, connect the
easyTRX2S to the on-board electrical system.
- Insert the CD, which is included in delivery, into the CD drive of your
PC and install the Programming Tool.
- If you do not have the CD or your Laptop does not have a CD drive
anymore, you can download the Programming-Tool from our
webpage:
o Go to www.easyais.com
o Select Information > Downloads > Software / Driver
o Select "Software for TRX2S and TRX2"
o Now download the Programming-Tool
o Open the ZIP file to reach the Setup and follow the
instructions.
- Search for wireless networks in your proximity
- Establish a connection to the network easyTRX2_XXXXX.
(Please find the password for the network at the bottom of your
device.)
If you get a window which shows you following, just press the blue
link to fulfil the complete password.
If you see following window, please press the blue link to fill in the
complete password.
Seite 35 von 68