Weatherdock easyTRX2S Series Manual page 32

Page 32 of 68
no position fix because of cloud coverage, an acoustic alert is also triggered.
As a result please do not choose a too small alerting radius.
The hardware switch (using CPA Alarm) can set the easyTRX2S into "RX-
Only" mode. The easyTRX2S will not send until the switch is turned off
again. The hardware switch can be reconfigured from Silent ("RX-ONLY"
mode) into Anchor-Alarm by the programming tool.
This makes the use of the anchor alert easier and more practicable as you
do not need a PC or Laptop for activation.
In the event of an anchor alert the LED flashes and the „easyCPA³" is
beeping continuously.
Picture 9-Anchor alarm
Spezification CPA-/Anchor-Alarm(Brown-/white+):
Voltage of buzzer = supply voltage of easyTRX2S(12-24VDC),
max. current = 0.2A
Seite 32 von 68