Picture 3-Static data
Please keep in mind that the MMSI can only be entered once. Please contact
your service partner if the MMSI was entered wrongly or if you are required
to enter another MMSI.
The NMEA port of the Class B Transponder is preset to 38400 baud by
default. You can change the output 1 baud rate (yellow,grey), if your chart
plotter supports 4800 baud only.
Another option is the output of GPS information. The devices of the
esasyTRX2S product line can output the GPS data of the integrated receiver
Seite 19 von 68