Cleaning And Maintenance; Cleaning And Care - Brandt BFC582LNW Instruction Manual

Switching off your appliance
If the appliance needs to be switched
off for an extended period, of time the
following steps should be taken to
prevent mould from forming in the
appliance.
1. Remove all food.

4. CLEANING AND MAINTENANCE

Cleaning and care

For hygienic reasons, the appliance
(including exterior
accessories) should
regularly at least every two months.
Caution The appliance must not be
connected to the mains
cleaning. Danger of electrical shock!
Before cleaning switch the appliance
off and remove the plug from the
mains socket.
Exterior cleaning
Clean your appliance regularly to maintain its
good appearance.
- Wipe the digital panel and display
panel with a clean, soft cloth.
- Spray water onto the cleaning cloth
instead of spraying directly on the
surface of the appliance. This helps
ensure an even distribution of moisture
to the surface.
- Clean the doors, handles and cabinet
surfaces with a mild detergent and
then wiped dry with a soft cloth.
Caution!
- Don't use sharp objects as they are
likely to scratch the surface.
- Don't use Thinner, Car detergent,
Clorox, ethereal oil, abrasive cleansers
or organic solvent such as Benzene for
cleaning. They may damage the
surface of the appliance and may cause
fire.
2. Remove the power plug from the
mains socket.
3. Clean
thoroughly.
4. Ensure that all the doors are wedged
open slightly to allow air to circulate.
Interior cleaning
and interior You should clean the appliance interior
be cleaned regularly. It will be easier to clean
when food stocks are low.
Wipe the inside of the fridge freezer
during
with a weak solution of sodium
bicarbonate, and then rinse with warm
water using a wrung-out sponge or
cloth. Wipe completely dry before
replacing the shelves and baskets.
Thoroughly
removable parts.
Although this appliance automatically
defrosts, a layer of frost may occur on
the freezer compartment's interior
walls if the freezer door is opened
frequently or kept open too long. If the
frost is too thick, choose a time when of
food stocks are low and proceed as
follows:
1 . Remove
accessories
appliance from the mains power and
leave the doors open. Ventilate the
room thoroughly to accelerate the
thawing process.
2. When defrosting is completed, clean
your freezer as described above.
Caution! Don't use sharp objects to
remove
compartment. Only after the interior is
completely dry should the appliance be
switched back on and plugged back
into the mains socket.
19
and dry the interior
dry all surfaces and
existing food and
baskets, unplug
frost from t h e freezer
the