Brandt BFC582LNW Instruction Manual page 30

accessible but out of reach of
children.
In case of doubt, ask to your
installer.
Your device is compliant with
EU directives and
modifications.
ENERGY SAVING
To reduce the
consumption of
appliance:
• Install it in a suitable
location (see "Installing your
appliance").
• Keep doors open for as
short time as possible.
• Do not put hot food in your
refrigerator or
particularly if they are soups
or preparations which emit a
large amount of steam.
• Ensure the
functioning of your device by
not letting accumulate too
much frost in the freezer
(defrost it when the ice
thickness exceeds 5-6 mm)
and periodically cleaning the
condenser
"Maintenance your device ").
• Regularly check the door
seals and make sure that
they always close effectively.
If this is not the case, please
contact service after sales
service.
• Do not let it set at too low a
temperature.
• Not fulfilling with drawers,
bins
arrangement could lead to
increased
consumption.
their
WARNING:
If the unit was shipped to home
in a horizontal position, place it
power
vertically and wait two hours
your
before plugging it in. A small
amount of oil may have flowed
into the refrigeration circuit, you
need to give it time to flow back
towards
connecting
otherwise you may damage it.
Before any maintenance,
disconnect the power plug. Do
not pull the power cable but
freezer,
directly enter the profile.
CLEANING AND
MAINTENANCE
optimal
 Before cleaning, unplug the
appliance and turn off the power.
 Do not clean the appliance
with metal objects, a steam
system, volatile oils, organic
solvents or abrasives.
(see
 Do not use sharp objects to
remove ice. Use a plastic scraper.
 To replace the light bulb, if
operation is possible by the user
himself, please refer to the
"Maintenance" of this manual.
Always be sure to unplug your
appliance before.
WARNING: If the appliance is
equipped with a LED lighting, it
can only be replaced by a
qualified technician
8
and shelves
energy
the motor before
the appliance,
.