Brandt BFC582LNW Instruction Manual page 33

Upper cover
Upper hinge cover (right)
Upper cover of upper door
Corner over
3. Take down the corner cover.
4. Remove the screws ① , and remove
part ② .
Special flange self-tapping
screws
Note: Please hold the upper door by
hand during step 4 to prevent the door
from dropping.
5 Remove the upper door and place it
on a smooth surface with its panel
upwards. Loosen screws ③ , detach
part ② and part ① then install part ①
and
another part ② (in the plastic bag) to
the left side with screws ③ . Put part ②
just detached back to plastic bag.
6. Loose screws used to fix the middle
hinge and remove middle hinge. Then
remove the lower door.
part
7. Place the lower door on a smooth
surface with its panel upwards. Loose
screws ③ , detach part ② and part
① .Turn part ① by 180°and then install
① and part ② to corresponding position
on left side together with screws ③ .
11
Door holder
Stop block
Self-tapping screws