Using Your Appliance; Display Controls - Brandt BFC582LNW Instruction Manual

3. USING YOUR APPLIANCE

Display controls

Use your appliance according to the following control regulations. The
corresponding functions and modes at the control panel are shown in the picture
below. When the appliance is powered on for the first time, the backlighting of the
icons on display panel starts working. If no buttons have been pressed and the
doors are closed, the backlighting will turn off.
Controlling the temperature
We recommend that when you start
your refrigerator for the first time, the
temperature for the refrigerator is set
to 4°C and the freezer to -18°C. If you
want to change the temperature,
follow the instructions below. Caution!
When you set a temperature, you set
an average temperature for the whole
refrigerator cabinet.
Temperatures inside
compartment may vary from the
temperature values displayed on the
panel, depending on how much food
you store and where you place them.
Ambient temperature may also affect
the actual temperature inside the
appliance.
1. Fridge
Press the middle part of
set fridge temperature between 2°C
and 8°C as needed. The control panel
will display the corresponding figures
according to the following sequence.
each
2. Freezer
Press the middle part of
set fridge temperature between -16°C
and -24°C as needed, and control
panel will display corresponding figures
according to the following sequence.
15
button to
button to