Introduction To Your Appliance; Location; Reversing The Door Swing - Brandt BC8511NS Instruction Manual

2. INTRODUCTION TO YOUR APPLIANCE

2.1

Location

When selecting a position for your unit you should make sure the floor is flat and firm, and
the room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler
or radiator. Also avoid direct sunlight as it may increase the electrical consumption. Extreme
cold ambient temperatures may also cause the unit not to perform properly. This unit is not
designed for use in a garage or outdoor installation. Do not drape the unit with any
covering.
When installing the unit, ensure that 10 cm of free space is left at both sides, 10 cm at the
rear and 30 cm at the top of the unit. This will allow cold air to circulate around the wine
cooler and improve the efficiency of the cooling process.

2.2. Reversing the Door Swing

1) Take off knuckle guard.
2) Take off top hinge.
3) Take off the door of refrigerating
chamber
4) Take off middle hinge with a screw
driver
10