Advertisement
Power on procedure
1.
Connect the power cord.
Be sure to use the specified power cord.
When the power cord is connected to one of the power supply unit, its AC POWER LED blinks green. At
this time, AC POWER LED on another power supply unit goes on amber.
When another power cord is connected, AC POWER LEDs on both power supply units turn on green.
2.
Press the POWER switch at the front of the server node.
The POWER LED is turned on green and after a while, the logo appears on the display.
Important
856-129811-101-00
POWER switch and LED
STATUS LED
Refer to user's guide and maintenance guide for error message in display or
STATUS LED.
AC Power LED
M
NMI
9 / 11
Advertisement
