Pairing The Headphones With A Bluetooth Device - Sennheiser PXC 550-II Instruction Manual

If you pair the headphones with the ninth Bluetooth device, the saved connection profile of the least
used Bluetooth device will be overwritten. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the headphones again.
Paired and connected Bluetooth device
Paired Bluetooth device (currently not connected)

Pairing the headphones with a Bluetooth device

1.Switch the headphones on (>
device (max. 20 cm).
2.Press and hold the voice assistant button for 4 seconds until you hear the voice prompt "Pairing".
The LEDs flash white one after the other. The headphones are in pairing mode.
3.Activate Bluetooth on your Bluetooth device.
4.Via the menu of your Bluetooth device, start the search for new Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth device are displayed.
5.From the list of found Bluetooth devices, select "PXC 550-II". If necessary, enter the default pin code
"0000".
If pairing was successful, you hear the voice prompts "Pairing successful" and "Device (1)
connected". The LED flashes white 3 times.
Switching the headphones on) and place them close to the Bluetooth
14