Activating/Deactivating The Active Noise Cancellation Anc; Setting The Anc User Mode - Sennheiser PXC 550-II Instruction Manual

If you want to create a quiet space in a noisy environment, you can simply use the headphones –
without cable and disconnected from any Bluetooth device – with ANC activated (>
Bluetooth/activating the flight
The Smart Control app allows you to select different ANC modes that offer the optimal settings
depending on the application/situation. For example, low-frequency noise can be suppressed, wind
noise can be minimized or a possible feeling of pressure on the ears can be avoided.

Activating/deactivating the active noise cancellation ANC

To activate the active noise cancellation ANC:
▷
Slide the ANC switch to the position:
–"I" (middle switch position): adjustable ANC mode "USER" (>
–"II" (lower switch position): maximum ANC mode "MAX".
To deactivate the active noise cancellation ANC:
Slide the ANC switch to the upper position "0".
▷

Setting the ANC USER mode

To be able to set the ANC USER mode, you require the Smart Control app (>
Control app).
▷
In the Smart Control app, select the desired ANC mode that is to be activated for the USER mode:
ANC USER Reduction of low-frequency noise and
mode background noise
"Adaptive" *
Reduction depending on the noise conditions
"Anti Wind"
Slight reduction to minimize disturbing wind or
movement noise
* default setting
mode).
Deactivating
Setting the ANC USER mode
Installing the Smart
20
);