Pairing Headphones With Bluetooth Device - Sennheiser Momentum Wireless M2 AEBT Instruction Manual

Getting started
Pairing the headphones with a Bluetooth device
Ensure that your headphones are within the 20 cm range of your smartphone
during this procedure.
1. Switch the headphones on (see page 17). Press the power button and keep
it pressed until you hear the voice prompt "pairing" and the LED flashes blue
and red.
The headphones are in pairing mode.
2. Enable the Bluetooth visibility on your smartphone.
3. On your smartphone, start a search for Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone are
displayed.
4. From the list of found Bluetooth devices, select "MOMENTUM M2 AEBT" to
establish a Bluetooth connection to the headphones. If necessary, enter the
default PIN code "0000".
If pairing was successful, you hear the voice prompt "connected" and the LED
switches off.
1
MOM ENTU
M
L
20 cm
4s
3
Menu
Add device
› connected ‹ › connected ‹
L
If no connection is established within 5 minutes, pairing mode is terminated
and the headphones return the disconnected state. Switch the headphones
off and repeat the pairing procedure.
2
› power on ‹
› pairing ‹
1s
4
MO MEN
TUM
Menu
Bluetooth on
Bluetooth o
MOMENTUM M2 AEBT
MOMENTUM M2 AEBT
Keyword: 0000
M2 AEBT | 15