Adjusting The Velocity Scan Modulation; Selecting The Color Temperature; Resetting The Advanced Picture Settings - Toshiba TheaterWide 51HX94 Owner's Manual

Adjusting the picture

Selecting the color temperature

You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm, as
described below.
Mode Picture Quality
cool blueish
medium neutral
warm reddish
To select the color temperature:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press z to highlight the COLOR TEMPERATURE field,
and then press • to select the mode you prefer (COOL,
MEDIUM, or WARM).
Video
Picture Settings
Theater Settings
Advanced Picture Settings
DVD RTN
Navigate Select Back
CH RTN
4. To temporarily save the new settings, highlight DONE and
press ENTER.
To permanently save the new settings, highlight SAVE and
press ENTER.
51,57HX94(E)077-83 79
Chapter 8: Using the TV's features
(continued)
Exit
EXIT
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

Resetting the advanced picture settings

To reset the advanced picture settings to their factory values:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
DVD RTN
Navigate Select Back Exit
EXIT
CH RTN
3. Highlight RESET and press ENTER.
4. Highlight SAVE and press ENTER.

Adjusting the Velocity Scan Modulation

The velocity scan modulation (VSM) feature enhances picture
contrast and sharpness. This feature has three modes: HIGH,
LOW, AND OFF.
NOTE: VSM is not required when viewing some high-quality
video material. If you are watching high-quality video material,
you may want to set VSM to OFF.
To Adjust the VSM:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press z highlight the VSM field, and then press • to
select the mode you prefer (HIGH, LOW, or OFF).
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
NOTE: If you change the mode in the Picture Settings window
after changing the VSM, the VSM may be automatically
changed to default settings associated with the newly selected
mode.
9/12/04, 10:05 PM
79