Advertisement
Quick Links
Advertisement
Related Manuals for OmniSistem LED FLAIR
Summary of Contents for OmniSistem LED FLAIR
- Page 1 LED FLAIR Manual 2009‐08‐01 ...
-
Page 2: Included In Box
INCLUDED IN BOX: 1 x LED FLAIR UNIT POWER CORD USER MANUAL UNPACKING INSTRUCTIONS UPON RECEIVING THE UNIT, UNPACK CARTON AND VERIFY THAT ALL PARTS HAVE BEEN RECEIVED IN GOOD CONDITION. IF THERE IS ANY SIGN OF DAMAGE TO THE CARTON OR UNIT DUE TO SHIPPING OR MISHANDLING, NOTIFY THE SHIPPER IMMEDIATELY. KEEP ORIGINAL PACKING MATERIALS IN THE EVENT THE UNIT MUST BE RETURNED FOR ANY REASON. ALL FIXTURES MUST BE RETURNED IN THEIR ORIGINAL PACKAGING. IF ANY ACCESSORY IS MISSING THAT SHOULD HAVE BEEN RECEIVED WITH THE UNIT, NOTIFY OMNISISTEM IMMEDIATELY WITHIN 3 DAYS OF RECEIVING THE ITEM. IF NOTIFICATION IS NOT RECEIVED WITHIN 3 DAYS, UNIT IS CONSIDERED TO HAVE BEEN RECEIVED WITH ALL COMPONENTS AND WITHOUT DAMAGES. CONTACT US OFFICE: OMNISISTEM LIGHTS & EFFECTS 6403 SOUTH 208TH STREET KENT, WA 98032 TEL: 253‐395‐9500 ... -
Page 3: Dimensions & Weight
FEATURES POWER: AC 90V ‐ 270V 60Hz POWER CONSUMPTION: 15W LED POWER: 5mm LED COUNT: 84 LEDs ( 14 RED, 14 GREEN, 18 BLUE, 14 AMBER, 24 WHITE) AMBIENT TEMPERATURE: 23° F ‐ 113° F ( ‐5° C ‐ 45° C) CONTROL: DMX (7 CHANNELS) SOUND ACTIVE (AUTO, STROBE) STAND ALONE (AUTO, STROBE) MASTER/SLAVE (SOUND ACTIVE, AUTO) DIMENSIONS: 15.75” x 8 ” x 4.75” WEIGHT: 10 LBS IMPORTANT SAFETY INFORMATION This unit is intended for indoor use only. Ensure the power source is of the correct voltage for this fixture. Connect power through a direct switch circuit, NOT a dimmer or variable circuit source. Disconnect unit from power when not in use. ... -
Page 4: Product Overview
PRODUCT OVERVIEW 1. Power In / Fuse Holder 2. DMX In 3. DMX Out 4. Sensitivity Knob 5. Microphone 6. Dip Switches REPLACING THE FUSE 1. Disconnect unit from main power 2. Unscrew the fuse holder cover to access the fuse 3. Remove the fuse carefully to ensure the fuse holder is not damaged 4. Replace with a fuse of the same rating 5. Screw fuse holder cover to original position to protect the fuse LED FLAIR Manual 2009‐08‐01 ... - Page 5 DMX CONTROL SETTINGS CHANNEL FUNCTION CH. 1 RED ON/OFF CH. 2 GREEN ON/OFF CH. 3 AMBER ON/OFF CH. 4 BLUE ON/OFF CH. 5 WHITE ON/OFF CH. 6 0‐5 LIGHT ON 6‐10 LIGHT OFF 11‐255 STROBE SLOW – FAST (20 F.P.S.) CH. 7 000‐111 CLOCKWISE ROTATION (SLOW TO FAST) 112‐143 STOP 144‐255 COUNTER CLOCKWISE ROTATION (SLOW TO FAST) DIP SWITCH SETTINGS ON OFF FUNCTION N/A 1,2,3,4,5,6,7,8,9,10 STAND ALONE, SOUND ACTIVATED ...
-
Page 6: Troubleshooting
LINE CONNECTION INTERNATIONAL SYMBOL BROWN Cathode L BLUE Anode N YELLOW/CYAN Ground Wire TROUBLESHOOTING If your unit does not turn on: Check the main power source is fully functional Check power cord connection on each side Check that the correct fuse has been installed and it is not blown If the unit is not responding to sound: Check that the dip switches at the rear of unit to have been set to sound activation Check sensitivity switch at the rear of the unit For additional information regarding operation of the unit or if you have a unit to be sent in for service*, contact the OmniSistem Technical Department at 253‐395‐9500 Monday – Friday 10am ‐ 4pm PST . * All service items must be given an RA# prior to shipping to our facilities. You can acquire a RA # by calling our offices during regular business hours. All service items must be shipped with a copy of original receipt if purchased within a year and covered under our warranty policy. If the unit has been modified warranty is void. LED FLAIR Manual 2009‐08‐01 ...