iKarus C 42 Series Pilot Operating Handbook page 55

C42 SERIES Pilot Operating Handbook
Rudder
Left
Right
Measuring point distance from the steering axis: ............. 16.24" (410 mm)
Elevator
Up
Down
Measuring point distance from the steering axis: ............. 16.24" (410 mm)
Flettner (Servo) trim-tab (model C42C and C42CS)
When the elevator neutral: Flettner tab ................... 0° ± 2° 78 mm ± 3 mm
Flaps
Note:
Flap angle is measured from the flap bottom to the bottom of the wing at the
root area (tangent front to rear spar)
Position I
Position II
Position III
Measuring point distance from the steering axis: ............. 12.20" (310 mm)
POH Issue 4 Rev. 5
32°±-2°
32°±-2°
28°±-2°
20°±-2°
-5° ± 1°
+11° ± 1°
+32° ± 1°
8.86" ± 0.39" (210 mm ± 10 mm)
8.86" ± 0.39" (210 mm ± 10 mm)
8.27" ± 0.59" (210 mm ± 15 mm)
5.12" ± 0.59" (130 mm ± 15 mm)
1.06" ± 0.39" (27 mm ± 10 mm)
2.36" ± 0.39" (60 mm ± 10 mm)
6.69" ± 0.39" (170 mm ± 10 mm)
Page 55 of 91