Pre-Flight Inspection; Engine; Landing Gear - iKarus C 42 Series Pilot Operating Handbook

C42 SERIES Pilot Operating Handbook

14 Pre-flight inspection

Before each flight the pilot must carry out a visual inspection of the aircraft.

14.1 Engine

-
Check propeller and spinner for damage and security
-
Check cowling near the propeller for abrasion (sign of defective
engine suspension or improper cowling attachment)
-
Check for leakage under the engine cowling
-
Check cooling liquids and lubricants
-
Check secure attachment of the engine cowling
-
Check that coolers are clean (oil cooler, water cooler)
-
Check air vents for blockage
-
Check NACA-intake for blockages

14.2 Landing gear

-
Check secure attachment of all components (hub caps, brake
cylinders, brake discs)
-
Check for a visible deformation
-
Check air pressure in the gas-filled shock absorber (aircraft) level, pull
aircraft down and release, gas-filled shock absorber must fully
rebound)
-
Check pressure and condition of tires
POH Issue 4 Rev. 5 Page 47 of 91