Assembly Diagram - LG ANEH033B1 Installation Manual

Assembly Diagram

Step 1. Open upper front panel and control box cover.
Step 2. Disconnect the three thermistors(CN_Pipe out, CN_Pipe in and CN_Room, CN_Out) , CN_EEV and CN_Motor1
connector in control box. Waste the harness and replace new one. (CN_Motor)
The new harness is provided with the Electric Heater accessories. If there are no harness, you don't need to be
remove. (It may vary depending on the model)
CN_Pipe in (White)
CN_Pipe out (Red)
Terminal Block
CN_EEV (White)
Terminal Block Terminal Block Terminal Block
CN_EEV (White)
CN_Motor1 (White)
CN_Motor1 (White) CN_Motor1 (White) CN_Motor1 (White)
NK
Upper Front Panel
(Multi V)
CN_Room (Yellow)
CN Out
CN Out CN Out CN Out
CN_EEV (White) CN_EEV (White)
CN_Pipe in (White)
CN_Pipe out (Red)
Control Box Cover Control Box Cover Control Box Cover
NJ
CN_Pipe in (White)
CN_Pipe out (Red)
(Single & Multi)
CN_Room (Yellow)
CN_Motor1 (white) CN_Motor1 (white)
CN_Motor1 (white) CN_Motor1 (white)
Assembly Diagram
(Single & Multi)
CN_Room (Yellow)
CN_Motor1 (white)
CN_Motor1 (white) CN_Motor1 (white) CN_Motor1 (white)
Installation Manual 7