Assembly Diagram
Step 3. Pull out control box. Remove heater panel.
Heater Panel
Control Box
Step 5. Install heater. The bracket should be inserted in
the provided slot.
Bracket
Slot
Step 7. Remove knockout and connect conduit.
8 Auxiliary Heat Control
Lock nut
Conduit
Conduit
mounting
plate
Knockout for upflow
Step 4. Remove the additional mounting bracket (shown
in the figure) while installing 5 kW and 10 kW
heater with NJ chassis.
Mounting bracket
Step 6. Attach the heater to panel using the existing holes
and screws.
Knockout for
horizontal-left