Cd Operation / Cd Changer Operation; Inserting A Cd; Removing A Cd; Switching On Cd Operation - Blaupunkt LONDON RDM 169 Operating Instructions Manual

CD operation / CD changer operation

You can play CDs on this audio system. In
addition, CDs can be played on the Blau-
punkt CD changers, CDC A 06, A 072, A 08
or A 071.
These changers can be purchased at any
authorised retail outlet.
Note:
Use only standard circular CDs measuring
12 cm in diameter!
CDs measuring 8 cm in diameter or CDs in
different shapes such as a butterfly or beer
mug are not suitable for playback using this
equipment.
This is very likely to result in the destruction
of the CD or the CD drive.
We assume no liability for damage to the
equipment caused by playing unsuitable
CDs.
CD operation

Inserting a CD

Switch on the unit and press 1 to un-
•
lock the operating panel.
The operating panel will fold down forward.
• Insert a CD (with the label facing up).
Never use force.
78
The CD will be transported to its playing
position automatically. CD playback will
start.
• Push the operating panel up on the
left-hand side and lock it into position.

Removing a CD

• Unlock the operating panel and press
the Eject button (arrow) for approx. 1
second.
The CD will be ejected.
To protect the CD mechanism, do not im-
pair or try to help the automatic insertion and
ejection of the disc in any way.
If the CD is not removed from the drive within
approximately 30 seconds, it will be re-
inserted automatically.
For safety's sake, the operating
panel must remain locked when
the vehicle is in motion.

Switching on CD operation

Make sure that a disc is inserted, "DISC-IN"
will appear in the display.
• Press CD, the CD functions will appear
in the display, e.g. track number,
name/playback time.
CD changer operation
Switching on CD changer
operation
Make sure that at least one CD has been
inserted into the magazine.
• Press CDC, the CDC functions will ap-
pear in the display, e.g. CD and track
number, name/playback time.
CD and CD changer operation

Selecting the display mode

You can select the desired display mode for
CD and CD changer operation:
• Press DIS as often as necessary until
you have selected the desired display
mode.
Top line
DOT display
"TRACK 1" – CD track number (CD oper-
ation)
or