10. GENERAL MAINTENANCE
Cleaning the Cutter Unit
1. Be sure to turn the power off before cleaning the cutter unit.
2. The cutters are sharp and care should be taken not to injure yourself when cleaning.
1. Loosen two screws and remove the cutter cover.
2. Remove the white screw and media guide.
3. Remove the jammed paper and trash.
4. Clean the cutter with dry cloth.
White Screw
(24741710304)
Cutter Cover
5. Assembling is reverse order of removal.
WARNING!
Media Guide
Screw
Swing Cutter
10-3
10.3 Removing Jammed Paper
Fixed Cutter
Cutter Unit
EM1-33033
Fig. 10-3