Manufacturer; Safety Information; Intended Use; Danger Symbols And Markings - DENTAURUM Assistent 3000 Instructions For Use Manual

Dear customer
Thank you for choosing a quality product from Dentaurum.
It is essential to read these instructions carefully and adhere to them to ensure safe, efficient use
and ensure that you and your patients gain full benefit.
Instructions for use cannot describe every eventuality and possible application. In case of questions
or ideas, please contact your local representative.
As our products are regularly upgraded, we recommend that you always carefully read the current
Instructions for use supplied with the product and stored in the internet at www.dentaurum.com,
even though you may frequently use the same product.

1. Manufacturer

Dentaurum GmbH & Co. KG I Turnstr. 31 I 75228 Ispringen I Germany

2. Safety information

Caution: Read through the instructions for installing and operating the unit carefully
before switching it on.

2.1 Intended use

The Assistent 3000 is only intended for welding and soldering of orthodontic appliances. The use of
the unit for any other purpose is prohibited. The use of the unit for its correct purpose also includes
compliance with all the instructions contained in the Instructions for use
„ „
The Assistent 3000 is not suitable for prosthetics work, in particular not for the processing of:
precious metal alloys
„ „
cast partial denture alloys or non-precious metal alloys for ceramics
„ „
When a Dentaurum product is taken out of operation once and for all, the disposal regulations
of the country of operation apply. Dentaurum or the dental trade is available to answer questions
regarding the correct disposal of any specific product.

2.2 Danger symbols and markings

In the Instructions for use, the following symbols are used to indicate sources of danger to the user:
This symbol indicates direct danger to the life or health of the user. Disregarding this warning
may involve a serious risk to health.
This symbol indicates important safety instructions. Disregarding this warning may cause
damage to the unit and / or other property.
This symbol gives important information on the correct use of the unit. Disregarding this
information may cause the unit to malfunction.
5