Wiring Diagrams; Alarm Siren - FingerTec AdapTec-X Installer's Manual

connecTing AdApTec-X To An ALArM siren
For all FingerTec door access control models, there is a security
button behind the terminal. During normal operation, the secu-
rity button is compressed and once the terminal is dismantled,
the button will be released and a
appear onscreen.
During the release of the button, the terminal will output an alarm signal. How-
ever, no alarm sound will be emitted if the terminal is not equipped with an
external siren.To use the siren feature, we recommend that you install an ad-
ditional alarm siren and connect it to the FingerTec terminals.
Benefits of Using AdapTec-X with Alarm Siren
We recommend that you install a terminal along with AdapTec-X if you plan
to use the alarm siren. In AdapTec-X, an additional port is readily built to re-
ceive the alarm signal from the FingerTec terminals. AdapTec-X has an output
of DC1V and it is suitable for use with an alarm siren that has the same power
input. You do not need to source an additional DC1V power supply for this
purpose. Furthermore, AdapTec-X comes with a
you can press the button to deactivate the alarm siren when required.

wiring diAgrAMs

ALArM siren •
R egulated Battery
Input
0V +14.5V 0V 12V
10
3
AC900, R2, Kadex, m-Kadex, H2i and Face ID 3
Tamper Siren EM
SW Out Lock
+ ---
Alarm
Siren
ALM+
ALM
GND
Connection
Points
1V
"System broken"
"Siren Mute"
+12 OV Siren
Out Mute
Siren Mute
Button
_
Remark:
• Set Auto Alarm in terminal to N.
• Menu > Options > Sys Opt > Adv
Opt > Auto Alarm > N.
message will
button where
AdapTec-X
Exit Data
oV
SW
D1 D0