Start-Up Commands - Gasboy 1000 Series Manual

START-UP COMMANDS

Use the following commands to set up the system at the initial start-up. The Series 1000 FleetKey
Operation Manual describes these commands in more detail. In the examples, bold represents
the information that you enter, and this symbol
1. Press CTRL F or RETURN. The system displays: SIGN ON:
2. Type GASBOY and press RETURN. (The word GASBOY is shown in the illustration for
example only. You will not see the word GASBOY as you are typing it.) The asterisk prompt
appears indicating that you are in Command Mode and can begin entering commands to
*
configure your Series 1000 System.
UECPÂQP0ÂC7U8Qa Â
↵
Â
3. Type LS to change the initial password (GASBOY) to one of your choice (up to 10
characters).
Â
HUÂ
R7UUYQT@0ÂR7UUYQT@
↵
Â
03/07/03
↵
represents the RETURN key.
Â
Series 1000 to FleetKey Conversion
11