Toshiba M30 User Manual page 45

LAN jack
Ether
CAUTIONS: 1. Do not connect any cable other than a LAN cable to
LAN active
indicator (orange)
Link indicator
(green)
NOTE: When the Wake-up on LAN function is activated, the LAN
indicators do not glow while the computer is in standby mode (while it is
waiting for a LAN wake-up signal).
External monitor
port
DC IN 15V
DC IN 15V
Modem jack
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable
2. Do not connect the modem to a digital telephone line.
Battery pack
This jack lets you connect to a LAN. The adaptor has
built-in support for Ethernet LAN (10 megabits per second,
10BASE-T) and Fast Ethernet LAN (100 megabits per
second, 100BASE-Tx). The LAN has two indicators. See
Chapter 4, Operating
the LAN jack. It could cause damage or malfunction.
2. Do not connect the LAN cable to a power supply. It
could cause damage or malfunction.
This indicator glows orange when data is being exchanged
between the computer and the LAN.
This indicator glows green when the computer is connect-
ed to a LAN and the LAN is functioning properly.
This 15-pin port lets you connect an external video
display.
The universal AC adaptor connects to this socket. Use
only the model of universal AC adaptor that comes with
the computer. Using the wrong adaptor can damage your
computer.
In areas where an internal modem is installed as standard
equipment, there is a modem jack that lets you use a
modular cable to connect the modem directly to a tele-
phone line.
from the telephone jack.
A digital line will damage the modem.
The battery pack powers the computer when the universal
AC adaptor is not connected. For detailed information on
the battery pack, refer to Chapter 6, Power.
Basics, for details.
Back side
2-5