Parallel/Printer; Display; Boot Priority - Toshiba M30 User Manual

User's Manual
About
Click About to display the HW Setup version.

Parallel/Printer

This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional

Display

This tab lets you customize your computer's display settings for either the internal
LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
LCD + Analog RGB Selects both the internal LCD and external monitor for

Boot Priority

Boot Priority Options list
This option sets the priority for booting the computer. You can select from 24
options.
The default is:
HDD FDD CD-ROM
* In this computer, CD-ROM refers to any optical media drive.
7-2
Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel
devices.
Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
simultaneous display.
LAN The computer looks for bootable files in
the following order: HDD, diskette drive,
CD-ROM* and LAN.