Supervisor Password; Starting The Computer By Password - Toshiba M30 User Manual

User's Manual
Disable (button)
Click this button to invalidate the token. You cannot revalidate old tokens, but
you can use the same SD cards to create new tokens.

Supervisor password

To set a supervisor password, follow the steps below.
1. Click Start.
2. Click Run.
3. Enter the following: C:\Program Files\Toshiba\Windows
Utilities\SVPWTool\TOSPU.EXE
NOTE: If you set a supervisor password, some functions might be
restricted when a user logs on with the user password.
This utility lets you do the following:
Register, delete or change the supervisor password.
Create or invalidate a supervisor token
NOTE: This function in the TOSHIBA Password Utility lets you invali-
date only supervisor tokens or all tokens, including user and supervisor
tokens.
Specify restrictions for general users.

Starting the computer by password

If you registered a password, there are two ways to start the computer:
Insert a token before you turn on the computer. The computer will start
normally, without displaying a password prompt.
Enter the password manually.
NOTE: The password is necessary only if the computer was shut down in
boot mode. It is not needed in Hibernation or Standby mode.
6-16