Subscribe to Our Youtube Channel
Related Manuals for Powr-Flite PF54
Summary of Contents for Powr-Flite PF54
- Page 1 OPERATOR’S MANUAL WET/DRY VACUUMS PF54, PF56, PF58 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony Corporation, All rights reserved X8611 03/2020 Save These Instructions...
- Page 2 MODEL PF54 PF56 PF58 Tank Polyethylene Polyethylene Polyethylene Motor 1200 Watts 1200 Watts Dual 1200 Watts Waterlift 100” 100” 80” Tank Size Power Cord Pigtail with 30’ Pigtail with 30’ Pigtail with 30’ Primary Filter Paper Pleated Paper Pleated Paper Pleated...
-
Page 3: Storage Instructions
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE *When using a wet/dry vacuum, basic precautions should be followed. *Read all instructions before using your vacuum IMPORTANT SAFETY ADVICE READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE When using an electrical appliance, basic precautions should always be followed. WARNING To reduce the risk of fire, electric shock of injury;... - Page 4 This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
-
Page 5: Maintenance And Servicing
DRAINING When the tank is full. 1. Release drain hose from hose clamp. 2. Remove plug from hose end to start draining process. 3. When draining is complete, replace hose plug and snap hose back into clips on back of tank. NOTE: When the water level in the tank exceeds the safety level, the safety device will automati- cally block the inlet, and the motor sound will be changed, but power will remain ON. -
Page 6: Troubleshooting Guide
TROUBLE SHOOTING GUIDE Loss of Suction CAUSE: SOLUTION: 1) Tank full. 1) Empty Tank 2) Dry filter assembly clogged. 2) Clean cloth filter. 3) Clogged hose or wand. 3) Remove obstruction. 4) Tank rim is dented. 4) Replace tank. 5) Loose or broken fan. 5) Contact manufacturer of service center. - Page 7 For warranty information go to www.Powr-Flite.com A Tacony Company 3101 Wichita Court • Fort Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 X8611 03/2020...
Need help?
Do you have a question about the PF54 and is the answer not in the manual?
Questions and answers