Akai ABTS-80 User Manual page 5

Norma l functio n
1.Rotate the VOLUME knob on the panel or press the key VOL+/- on the remote
control to adjust the volume control to your listening level.
2.Press the key MODE on the panel or on the remote control to select TUNER/AUX/USB/
BLUETOOTH mode.
3.Press the PREV/NEXT key on the panel or the
previous or next song.
4.Press the MUTE key on the remote control to mute, press it again to reset.
Ligh t colo r contro l functio n
To control the light modes coming from the speaker panels by pressing the
"light Mode" button on the left side control panel
Each pressing will get below different colors
Mode one: red lights flash
Mode Two: green lights
Mode Three: blue lights flash
Mode Four: "Auto", the various color combinations cycle through and flash.
Mode Five: "OFF", turn off the light
Tune r applicatio n
1. Adjust the antenna to obtain optimum reception.
2. Press MODE key on the panel or on the remote control, to select TUNER function,
frequency is showed on the LED display.
3. Press or hold the TU- /TU+ keys on the panel you can adjust the radio frequency
tune, short press to find tune FM channel and long press to select preset channel.
4. Press AUTO key on the panel to auto search FM channel.
KARAOK E functio n
1. The machine can auto detect whether MIC1, MIC2 is inserted.
Please turn off the microphone volume and adjust the volume gradually after inserting
the microphone.
2. Rotate MIC VOLUME knob
3. Rotate ECHO key
Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.
Bluetoot h Pai r & Connectio n
• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth features on your phone or music player.
• Turn on and set this unit in the Bluetooth mode.
• Set your phone or music players to search for Bluetooth devices.
• Select AKAI ABTS-80 from search results on your phone or music player.
• Select OK or Yes to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey. Steady
• Long press the BLUETOOTH key on the panel to disconnect previous device
and enter pairing mode.
on the panel
on the panel to change the microphone ECHO.
/ key on the remote control to select
to change the microphone VOLUME.
display indicates successful connection.
Operating
5