1.Intended use The appliance works as a speaker/ amplifier. Via the bluetooth connection music can be played wirelessly. It is also possible to play music using the AUX connection. The appliance contains a built-in rechargeable battery and can charge external devices using the USB connection. Read the manual carefully before the first use.
3.Preparations for use 3.1. Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service.
4.Installation Put the appliance on a horizontal flat surface. Connect the random equipment to the appliance. Read the paragraph "Connecting external devices". Charge the rechargeable build in battery. See for instructions section 4.1 CAUTION Do not put the appliance near a heat source. ...
4.2. Charge the battery Connect the appliance to the mains. WARNING Charge the battery for at least 4 hours. Red LED off: battery fully charged NOTE: The housing of the adapter may become warm during operation. This is normal. ...
5.Functions 5.1. ASW10BK Bluetooth speaker 1. POWER button 2. VOL- button 3. VOL+ button When audio is being played while using the AWS10: 1. PLAY/ PAUSE button...
6.Operation 6.1. Turning the device on and off. Keep the POWER key pressed down to switch the appliance on / off. NOTE: The AWS10 will enter a power saving mode if no audio is being played for 30 minutes. ...
6.2. Operation with BLUETOOTH You can wirelessly connect loudspeakers to devices that have Bluetooth A2DP. Preparation Make sure the AUX cable is removed from the AWS10. Otherwise the bluetooth connection will not be established. Keep the key POWER pressed down until the device switches on. ...
Page 9
Establishing a Bluetooth connection (PAIREN) Go to the Bluetooth Menu of your Bluetooth device. Search Bluetooth devices and select AWS10 to establish connection Enter "0000" when the player asks for the PIN code You will hear a beep. ...
Page 10
6.3. AUX IN Connect the external appliance to your AWS10. Use the supplied AUX cable. The AWS10 will automatically switch into AUX mode after inserting the AUX cable. 6.4. USB connection to charge device Connect the external appliance to your AWS10. ...
7.Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. For longer period of storage, we advice to recharge the battery at least once every two months.
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. For more information and warranty conditions, please visit: www.akai.eu Do not dispose of batteries as household waste but take them to a battery recycling facility.