Project Options - Conrad C-Control Pro Mega Series Manual

55 C-Control Pro Mega Series
4.1.5

Project Options

.
For each project the compiler settings can be changed separately.
The items Author, Version, Commentary can be freely inscribed. They serve as memory support in
order to better remember the project details at a later date.
In "Select CPU" the target platform of the project is determined. A mouse click on "Scan Hardware"
will scan the connected C-Control Pro Module and select the correct CPU.
In "Options" Multi Threading is configured and it is further determined if a Debug Code should be
generated.
If a Debug Code is compiled the Byte Code becomes insignificantly longer. For each line in the
source text which contains executable commands the Byte Code will be one Byte longer.
In case Multi Threading should be used the selection box in the project options must be
selected. Further the parameters for each separate Thread must be set under "Configure Threads".
© 2008 Conrad Electronic