Timer_T1Start; Timer_T1Stop; Timer_T1Time - Conrad C-Control Pro Mega Series Manual

period period duration
PW0 pulse width channel A
PW1 pulse width channel B
PW2 pulse width channel C
PS prescaler (see table prescaler)

6.19.28 Timer_T1Start

Timer Functions
Syntax
void Timer_T1Start(byte prescaler);
Sub Timer_T1Start(prescaler As Byte)
Description
The frequency generation is started with the already set parameters. The prescaler must be given again.
Parameter
prescaler prescaler (see table)

6.19.29 Timer_T1Stop

Timer Functions
Syntax
void Timer_T1Stop(void);
Sub Timer_T1Stop()
Description
The frequency generation gets stopped. The output signal can be 0 or 1, dependent on the last state. Only
the clock generation is stopped, all other settings stay the same.
Parameter
None

6.19.30 Timer_T1Time

Timer Functions
Syntax
© 2008 Conrad Electronic
Libraries 212