Entering The Softkey Interface; From The "Pmon" User Interface - HP 64793 Series User Manual

Entering the
Softkey Interface
From the "pmon"
User Interface
If you have installed your emulator and Softkey Interface software as
directed in the HP 64700 Series Emulators Softkey Interface
Installation Notice, you are ready to enter the interface. The Softkey
Interface can be entered through the pmon User Interface Software or
from the HP-UX shell.
If /usr/hp64000/bin is specified in your PATH environment variable,
you can enter the pmon User Interface with the following command.
$ pmon <RETURN>
If you have not already created a measurement system for the H8/338
emulator, you can do so with the following commands. First you must
initialize the measurement system with the following command.
MEAS_SYS msinit <RETURN>
After the measurement system has been initialized, enter the
configuration interface with the following command.
msconfig <RETURN>
To define a measurement system for the H8/338 emulator, enter:
make_sys emh8338 <RETURN>
Now, to add the emulator to the measurement system, enter:
add <module_number> naming_it h8338
<RETURN>
Enter the following command to exit the measurement system
configuration interface.
end <RETURN>
If the measurement system and emulation module are named
"emh8338" and "h8338" as shown above, you can enter the emulation
system with the following command:
emh8338 default h8338 <RETURN>
Getting Started 2-7