IBM 3745 21A Installation Instructions Manual page 18

Installation Instructions
IBML
From the control panel:
1. Set the Function indicator to 1.
Press the Validate key.
2. Set the Service Mode indicator to 2.
Press the Validate key.
3. Press the Power On Reset key.
The MOSS IML is completed when F0E is dis-
played on the control panel.
11.2 Open MOSS/MOSS-E
Session
From the Service Processor, wait until the ICON
of the identified 3745 becomes purple.
1. On the 3745 Menu window, double click
on MOSS Console.
Wait for Function Selection Rules screen.
11.2.1 Update the CDF
1. Enter CDF, press Enter.
2. Enter 4 (VERIFY), press Enter.
The value from the CDF DATA and the
MACHINE DATA should be identical
except for the new hardware installed.
3. To update the CDF with machine values,
enter 2, press Enter.
4. When CDF VERIFY COMPLETED is dis-
played, press F1.
11.2.2 Record the 3745 Model
From the Service Processor:
1. On the Service Processor menu, double
click on Manage 3745/3746-900 Installa-
tion.
2. Click on the line of the 3745 you have
just converted.
3. Click on Change.
4. On Controller Model Change message,
click on Yes.
From the 3745 control panel:
5. Press the Power OFF key.
3745 PN 17G5534 EC C38405
FFBM 18 of 22 06APR93
18
From the Service Processor:
Wait for Function Selection Rules screen.
11.2.3 Run the Diagnostics
•
•
EC C38405A EC D55799
17JUN93 16SEP94
6. Set the Service Mode indicator to 2.
Press the Validate key.
7. Set the Function indicator to 1.
Press the Validate key.
8. Press the Power On Reset key.
The MOSS IML is completed when F0E is
displayed on the control panel.
9. Click on OK.
The 3745 Model number is being
recorded.
10. When the operation is completed, click
on OK.
11. Click on Cancel.
12. On the 3745 Menu window, double click
on MOSS Console.
1. Enter ODG, press Enter.
2. Enter 2 (CCU), press Enter.
•
If NO ERROR FOUND is displayed,
press F1.
•
Otherwise, see the MIP , Chapter 1.
3. Enter 3 (IOCB), press Enter.
• If NO ERROR FOUND is displayed,
press F1.
• Otherwise, see the MIP , Chapter 1.
4. If no HSS/ELA feature installed, press F1
and go to next Step.
If HSS/ELA feature is installed in your
3745, run HSS/ELA diags on at least one
HSS or ELA on each DMA bus (Adp 1-4
and 5-8) with HSS/ELA adapter.
If NO ERROR FOUND is displayed, press F1.
Otherwise, see the MIP , Chapter 1.
EC D55883 EC E27926
11MAY95 14MAR97