Nuna Triv User Manual page 8

Arm Bar
It is always recommended that the arm bar be used, but
it is not a restraint device. Always secure the child with
the harness.
1 - Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. A "click" sound means the
arm bar is assembled completely.
2 - To remove the arm bar, press the arm bar release buttons
(1) and lift the arm bar up (2).
Insert
3 - To assemble the insert, place the insert over the seat pad
and thread the shoulder, waist and crotch harness straps
through their respective slots.
4 - Attach the hook and loop fastener on the insert to the
top of the seat pad.
Check Setup
Stroller frame is fully open and locked.
Rear and front wheels are securely attached.
Arm bar is securely attached.
TRIV instructions
12 ™
1
click
2
2
1
1
3
4
TRIV instructions
™ 13