Minolta EP5000 Disassembly And Reassembly page 95

4. With the "Adjust 1/2" menu on the screen, touch
light "A6 Book B-Scan Regist".
1156D166CA
5. Touch the shift key A or " to change the setting value.
6. Touch Enter to validate the setting.
Setting Instructions
D If dimension A on the copy is longer than 23 mm, increase the setting value.
D If dimension A on the copy is shorter than 17 mm, decrease the setting value.
*If the measurement does not fall within the specifications through one setting, try another
setting.
NOTE
Be sure to touch Enter before pressing the Panel Reset Key to return the copier to the Basic screen.
If this is not done, the old setting remains valid.
Next
to show the "Adjust 2/2" menu. Then, high-
1156D163CA
Touch This Key if Measurement is Longer.
Touch This Key if Measurement is Shorter.
D-88
1156D163CA