Fluke 1760 Getting Started Manual page 23

Measurements of the
harmonics/THD/TID of
voltages and currents are
recorded at intervals of
3 seconds. Data is generated
if a set trigger event occurred
RMS shows user-defined
averaging times
Shows sample values if a
trigger was set
Shows recorded ripple
control signals if a trigger
was set
Shows recording of
measurements with sampling
frequency of between
100 kHz and 10 MHz (if
Transients box in Transient
Trigger window selected)
4. Click on Events button.
.
5. Click
Analyzing the Recorded Data
Figure 11. Event Overview
6. The right side column displays the number of
events. Double-click on an event for details
Power Quality Analyzer
emv49.bmp
15