1760
Getting Started Manual
•
Measurement sensors must not be connected to
the unused circuits
•
Ensure that connectors with locking mechanism
are firmly locked
Device Shut Down
•
Immediately disconnect the unit from the power
supply if you detect any damage to the housing,
controls, power cable, connecting leads or
connected devices
•
If in doubt regarding the safe operation of the
Recorder, immediately shut down the unit and
the respective accessories, secure them against
inadvertent power-on and contact an authorized
service agent
Safety Warnings on Device Housing
The mains connection must conform to the following
ranges/values:
4
Figure 2. Instrument Label
Figure 3. Battery Label
emv02.wmf
emv03.bmp