Pass Count; Error Count; Write Data - Toshiba Satellite 110 Series Maintenance Manual

3.19 Log Utilities
3.19.1 Function Description
This function logs error information generated while a test is in progress and stores the
results in RAM. This function can store data on a floppy disk or output the data to a printer.
If the power switch is turned off, the error information will be lost. The error information
displays in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name ( ERROR STATUS NAME)
3.19.2 Operations
1. Selecting 5 and pressing Enter in the Diagnostics Menu logs error information
into RAM or onto a floppy disk. The error information displays in the following
format:
XXXXX ERRORS
CNT TS-NAME PASS STS ADDR
001 FDD 02 0000
001 FDD 01 0000

Pass count

Subtest number
Test name

Error count

[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
3-42
WD RD HSTS [STATUS NAME]
103 00001 00 00
180 00001 00 00
Address
Error status
Read data

Write data

FDD - WRITE PROTECTED
FDD - TIME OUT ERROR
HDC status
Error status name
110 Series