Maintenance; Troubleshooting - Klutch 407116 Owner's Manual

Condensate timer drain
Table of Contents

Advertisement

o
Set the interval timer using the right dial. The interval timer determines the amount of time
before the drain opens to drain the condensate (.05 to 45 minutes).
Maintain the Condensate Timer Drain by adopting a program of conscientious repair and maintenance
in accordance with the following recommended procedures. It is recommended that the general
condition of any drain be examined before it is used. Keep your drain in good repair. The following
chart is based on a normal operation schedule.
Maintenance Interval
Weekly
Monthly/Yearly
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Drain is not opening or closing
properly.

Maintenance

Open the self-cleaning valve and discharge the debris, if
any.
Inspect the strainer screen and replace if necessary.

Troubleshooting

Possible Cause
Debris is caught in screen/drain
valve.
Page 9 of 12
Maintenance Point
Corrective Action
Clean screen/ remove debris from
drain valve.

Advertisement

Table of Contents
loading

Table of Contents