Table of Contents
Advertisement
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep all cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control. Keep handles dry, clean, and free from oil and grease. Also refer to the engine manufacturer's
instruction manual for additional information about engine maintenance. The following chart is based
on a normal operation schedule.
Maintenance Interval
Every month
Every week
Maintenance
Maintenance Point
Store idle equipment. When not in use tools must be stored in
a dry location to inhibit rust.
Lubricate all moving parts and surfaces weekly with a light oil.
This will keep the parts moving freely, and prevent rusting.
Parts Diagram
Page 8 of 11
Advertisement
Table of Contents
