Advertisement
Quick Links
24in. Bending Brake
OWNER'S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and
other basic safety precautions may result in serious personal injury.
Item# 49699
Thank you very much for choosing a Klutch product. For future reference, please complete the
owner's record below:
Serial Number/Lot Date Code: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This24" Bending Brake is designed for certain applications only. Northern Tool and Equipment
cannot be responsible for issues arising from modification or use of this product in an
application for which it was not designed. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed.
For technical questions please call 1-800-222-5381.
Table of Contents
Intended Use ----------------------------------------------------------------------------------------------- 1
Technical Specifications ---------------------------------------------------------------------------------- 1
Important Safety Information ----------------------------------------------------------------------------- 2
Specific Operation Warnings ----------------------------------------------------------------------------- 2
Assembly --------------------------------------------------------------------------------------------------- 3
Operating Instructions ------------------------------------------------------------------------------------ 4
Maintenance ----------------------------------------------------------------------------------------------- 4
Parts Diagram ---------------------------------------------------------------------------------------------- 5
Parts List --------------------------------------------------------------------------------------------------- 5
Replacement Parts ---------------------------------------------------------------------------------------- 6
Limited Warranty ------------------------------------------------------------------------------------------- 6
Intended Use
This KLUTCH 24" Bending Brake is ideal for a smallworkshop environment where ease of use
isimportant. The Bending Brake canbend up to 18-gauge (0.473 in. or 1.2mm) mildsteel.
Technical Specifications
Property
Specification
Bending Capacity
Bends materials up to 18 gauge steel; makes up to 90degree bends;
bends material up to 24 inches wide.
Dimensions
32in.x17in. x 21in.
Designed for bench top mounting using 3/8in. diameter bolts.
24in. Bending Brake
OWNER'S MANUAL
Purchase Date: _______________
1 of 6
Advertisement
Related Manuals for Klutch 49699
Summary of Contents for Klutch 49699
- Page 1 24in. Bending Brake OWNER’S MANUAL Thank you very much for choosing a Klutch product. For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: _______________ Purchase Date: _______________ 24in. Bending Brake Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
- Page 2 24in. Bending Brake 24in. Bending Brake OWNER’S MANUAL OWNER’S MANUAL Important Safety Information Assembly No assembly required. The shrinker/stretcher is WARNING: fully assembled at the factory. WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury.
- Page 3 24in. Bending Brake 24in. Bending Brake OWNER’S MANUAL OWNER’S MANUAL Parts Diagram 3. Mount each clamp assembly as shown in Figure 4 on the next page. Ensure that eachadjustment set screw shown in Figure 4 istowards the outside of the bending brakeassembly. Secure with hex bolts, lockwashers and hex nuts.
- Page 4 Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.