Advertisement
Quick Links
48 INCH PAN AND BRAKE BOX
OWNER'S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and
other basic safety precautions may result in serious personal injury.
Item# 49676
Thank you very much for choosing a Klutch product. For future reference, please complete the
owner's record below:
Serial Number/Lot Date Code: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This pan and brake box is designed for certain applications only. Northern Tool and Equipment
cannot be responsible for issues arising from modification or use of this product in an
application for which it was not designed. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed.
For technical questions please call 1-800-222-5381.
Table of Contents
Intended Use ----------------------------------------------------------------------------------------------- 1
Technical Specifications ---------------------------------------------------------------------------------- 1
Important Safety Information ----------------------------------------------------------------------------- 2
Specific Operation Warnings ----------------------------------------------------------------------------- 3
Assembly --------------------------------------------------------------------------------------------------- 3
Before Each Use ------------------------------------------------------------------------------------------- 4
Operating Instructions ------------------------------------------------------------------------------------ 4
After Each Use --------------------------------------------------------------------------------------------- 5
Maintenance ----------------------------------------------------------------------------------------------- 6
Parts List --------------------------------------------------------------------------------------------------- 6
Parts Diagram ----------------------------------------------------------------------------------------------7
Replacement Parts ---------------------------------------------------------------------------------------- 8
Limited Warranty ------------------------------------------------------------------------------------------- 8
Intended Use
The Pan and Brake Box is used as a hand-brake as well as to form a box or pan with four sides
and a bottom from one sheet of metal. The machine is mostly used in the manufacture of
electric switch boxes and panel board cabinets. Other applications are forming cases, buckets,
carry boxes and all kinds of boxes and pans.
Technical Specifications
Property
Max. Lift Height (in.)
Bending Applications
Dimensions (in.)
CAPACITY
The capacity of the brake is determined by the bending edge thickness provided by the Angle
Bar (25) when mounted on the bending leaf (22).
The Angle Bar (25) allows the full-rated 1" flange or wider on mild steel. Narrower flanges can
be bent on lighter metal.
On capacity work, the reinforcing Angle Bar must be in the normal or top position.
The capacity of brake is reduced by four gauges if the brake is used without the Angle Bar.
48 INCH PAN AND BRAKE BOX
OWNER'S MANUAL
Purchase Date: _______________
Specification
7/8
Mild steel, stainless steel, aluminum, copper place
64.2 (L) x 23.6 (W) x 16.2 (H)
1 of 8
Advertisement
Related Manuals for Klutch 49676
Summary of Contents for Klutch 49676
-
Page 1: Table Of Contents
48 INCH PAN AND BRAKE BOX OWNER’S MANUAL Thank you very much for choosing a Klutch product. For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: _______________ Purchase Date: _______________ 48 INCH PAN AND BRAKE BOX Save the receipt, warranty and these instructions. -
Page 2: Important Safety Information
48 INCH PAN AND BRAKE BOX 48 INCH PAN AND BRAKE BOX OWNER’S MANUAL OWNER’S MANUAL Important Safety Information CAUTION WARNING: TOOL USE AND CARE • Read and understand all instructions. Failure to follow all instructions may result in serious •... -
Page 3: Before Each Use
48 INCH PAN AND BRAKE BOX 48 INCH PAN AND BRAKE BOX OWNER’S MANUAL OWNER’S MANUAL Before Each Use JAW ALIGNMENT Before bending, check that the fingers (16) form a straight bending edge. If not, perform the Clean Up following: loosen the clamp bar screws (17). With the angle bar (25) mounted, rotate the The unpainted surfaces are coated with a waxy oil to protect them from corrosion during bending leaf (22) straight up, straighten the fingers so they are inline, then retighten the clamp shipment. -
Page 4: Maintenance
48 INCH PAN AND BRAKE BOX 48 INCH PAN AND BRAKE BOX OWNER’S MANUAL OWNER’S MANUAL 3. Wipe a light coat of machine oil on all machined surfaces to prevent rust and oil the machine Parts Diagram in necessary places. 4. -
Page 5: Replacement Parts
48 INCH PAN AND BRAKE BOX 48 INCH PAN AND BRAKE BOX OWNER’S MANUAL OWNER’S MANUAL Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts.