Charging; Maintenance - Innovatronix Tronix Explorer Mini User Manual

Table of Contents

Advertisement

Charging

Make sure that the Tronix Explorer Mini is switched OFF.
See Installation procedures above.
REMINDER: DO NOT STORE THE UNIT FOR MORE THAN A MONTH WITHOUT CHARGING. CHARGE IT AT
LEAST ONCE A MONTH FOR OPTIMUM BATTERY PERFORMANCE.
When the unit is accidentally discharged in full (unit was left-on for a long time even after low battery shut down), slight
abnormality may be observed when trying to recharge the unit. When charged, unit may falsely show that battery is full. Just
repeatedly plug and unplug the unit every 30 minutes until battery recovers and the indicator starts to blink.
Charging Guide
Not Connected
Charging
Battery Full

Maintenance

For optimum performance, keep the battery fully charged. A lit Green charging LED indicates a fully
charged battery. On the other hand, when the inverter gives three (3) beeps prior to shutdown, the
batteries are discharged.
Turn off the unit when not in use. Leaving Tronix Explorer Mini on when unused will severely drain the
battery.
Use a dry cloth when cleaning the unit. Do not use any liquid or detergents.
Coil cables when not in use. Loose cables may cause accidents.
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10, 2015
Status
Red LED is on
Red LED is on, Green LED is blinking
Red LED is on, and Green LED is on
Indication
5

Advertisement

Table of Contents
loading

Related Products for Innovatronix Tronix Explorer Mini

Table of Contents