Battery Replacement - Innovatronix Tronix Explorer Mini User Manual

Battery Replacement

Caution!
Risk of electric shock. Extreme caution should be observed at all times. Before replacing the
batteries, disconnect all cords and wait 30 minutes before proceeding with the repair. Remove all
metal objects attached to the body such as jewelry, wristwatch, and the like. Use properly insulated
tools and handles. Strictly follow the instructions to avoid further damage and injury.
1. Make sure Explorer Mini is switched off.
2. Remove the screws on the side of the top plastic cover.
3. Remove the plastic cover. Remove the screws on the side of the top metal cover.
4. Remove the metal cover. Lift the battery and carefully disconnect the wires on the battery terminals.
5. Connect a new 12 V/9 Ah SLA battery
6. Connect the red wire to the positive (+) terminal
7. Connect the black wire to the negative (–) terminal.
8. Place the battery back to its position.
9. Place back the metal cover. Tighten all screws.
10. Place back the plastic cover. Tighten all screws.
Dispose replaced battery properly. Deliver the battery to its manufacturer for recycling or observe proper battery
disposal.
Note:
Do not interchange the polarity of the wires. Black wire is for the negative (–) terminal and red wire is for the
positive (+) terminal.
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10, 2015
6