Getting Started; What's In The Box; Installation - Innovatronix Tronix Explorer Mini User Manual

Getting Started

What's in the box?*

*Contact Tronix customer care service (or seller) if package is deemed incomplete.

Installation

Always place the Tronix Explorer Mini in an environment there is no excess of heat, dust and moisture.
1. Make sure that the Tronix Explorer Mini Inverter is switched OFF.
2. Connect the charger plug of battery charger unit to the charging port (14Vdc) located on the front top
panel of the Tronix Explorer Mini Inverter Unit. Make sure that connector is securely plugged in.
3. Plug the power cord to the 100-240 Vac socket of the battery charger unit and plug the power cord to the
100-240 Vac convenience socket or main supply.
4. The red LED (Power indicator) should be ON. When the battery is fully charged, the red LED and the
green LED are both turned ON.
If Tronix Explorer Mini is being charged the first time, charge the unit for 12 to 15 hours. This step ensures
optimum battery performance. Succeeding charges would only take 4 to 6 hours.
NOTE: The socket outlet to which Tronix Explorer Mini is connected must be in close proximity and must be
easily accessed.
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10, 2015
1 x Tronix Explorer Mini Main Inverter unit
1 x Power Cord
1 x Universal Adapter (only for 115 – 60 models)
1 x Car Battery Charger
1 x Carrying Case
1x Tronix Explorer Mini User's Manual
3