Important Safety Instructions; General Safety; Electrical Safety - Innovatronix Tronix Explorer Mini User Manual

Important Safety Instructions

Save this User's Guide. Contents of this user's guide should be followed during installation, operation and maintenance of Explorer Mini.

General Safety

Do NOT expose the Tronix Explorer Mini to dust, moisture, liquids, rain or snow.
•
Do NOT block ventilation openings of the Tronix Explorer Mini; Overheating may occur.
•
Do NOT place the Tronix Explorer Mini in a compartment with zero clearance.
•
Not recommended attachments, when used with Tronix Explorer Mini, may result in risk of fire, electrical
•
hazard or injury.
Periodically observe the status of the LED indicators to make sure that Tronix Explorer Mini works as
•
intended.

Electrical Safety

Always connect Tronix Explorer Mini to a grounded outlet. The socket outlet to which the product is
•
connected must be in close proximity and must be easily accessed.
Flash units and other supported equipment must be properly connected to Tronix Explorer Mini. Secure
•
working connection and socket from outlet to the inverter.
Always turn OFF and unplug Tronix Explorer Mini before doing any maintenance.
•
Tronix Explorer Mini incorporates multiple power sources. Connect only ONE of these sources at a time.
•
Though not posing any danger, simultaneous connection of any of these sources is NOT recommended.
Disconnect ALL power cords to completely remove power from the unit.
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10, 2015
1