Vertical Express ICON 32 Product Manual page 96

Adjustments
Adj (cont.)
Unit
O34 F/R
O35 sec.
O36 floor
O37 F/R
O38 —
O39 —
O40 —
O41 —
O42 —
O43 —
O44 # of starts
O45 —
O55 F/R
This manual shows only the parameters that have an operational relevance to the ICON32. The UIT may have
additional parameters available, which should not effect the controller operation.
©Vertical Express
Range Definition (cont.)
Lobby Recall Door - This adjustment sets the preferred door to open at the lobby recall
landing during lobby recall operation.
0–1 Values:
0 = Front
1 = Rear
Fan-Light Shutdown Timer - This adjustment sets the time that the fan and light turn off
0–3600
(after all demand for service from the car has ended).
Capture Return Landing.
Value:
1–nf
0 = Stop car at the first available landing.
1 - nf = Specify which landing is the capture return landing.
Capture Door To Open.
Values:
0–2 0 = Front
1 = Rear
2 = Both
Capture Door Operation.
Values:
0–1
0 = The doors remain closed until opened with the CAPTD input.
1 = The doors open and stay open until deactivated.
Capture Override Independent Service.
Values:
0–1
0 = No
1 = Yes
Capture Override Car Stop Switch.
Values:
0–1
0 = No
1 = Yes
Attendant Service Call Latch - This adjustment allows the attendant service to latch car
calls while the doors are open.
0–1 Values:
0 = Disable the latch
1 = Enable the latch
This adjustment enables or disables the reverse car call cancel.
Values:
0–1
0 = Enable
1 = Disable
This adjustment enables or disables CE fixtures and VISTA monitoring.
0-65535 Values:
0 = Off
9 = Enable CE fixture on the car CAN channel 2.
Jack Resync Interval - This adjustment sets the number of motor starts necessary before
100-65535 the launch of automatic jack resync operations.
See also: FJR, JRT, and O30
0–1 Enable Sabbath Operation.
Sabbath Operation Main Floor Opening - When the Sabbath Operation is initiated, this
adjustment sets the door opening at the recall floor (that will open after homing), to begin
dispatching to selected floors.
0–1
Values:
0 = Front doors
1 = Rear doors
3-12
Diagnostics Section
Printed in USA April 2020