Vertical Express ICON 32 Product Manual page 102

Adjustments
Adj (cont.)
Unit
Z42 —
Z43 —
Z44 0.1 sec.
This manual shows only the parameters that have an operational relevance to the ICON32. The UIT may have
additional parameters available, which should not effect the controller operation.
©Vertical Express
Range Definition (cont.)
VIP Voice Message ID - This adjustment sets which message to activate with VIP Call.
0 = No message
0,9,13
9 = Code Blue message
13 = Custom message (requires custom chip).
Enable VIP Operation at Group Level.
Values:
0-1
0 = Disable
1 = Enable
Run Stall Time (Required by California) - This adjustment sets a timer that quickly detects a
stalled UP Run.
0-100 This timer is intended to prevent faults such as:
• A motor burn-out (in the event of a motor phase reversal).
• Running Up after rupture valve has activated (to prevent emptying tank).
3-18
Diagnostics Section
Printed in USA April 2020